For welders and inspectors sitting CWI Part B

Full CWI prep for less than one Part B retest.

1455 original questions, 7 timed exams at real length and 26 modules of lessons for Parts A, B and C.

Plans and prices

$385 to retake Part B at AWS vs $249 to prepare.

Exam dateOptional

Pick one and we'll suggest a plan.

Terms and refunds · Secure checkout by Stripe · Billed by Nori Software

Ask Tack about this course AI

Tap a question, or type your own. With Full CWI prep: up to 40 messages a day.

    Answers come from this course's own plans and contents.

    • 1455 original questions, every one explained
    • 7 timed exams and 26 modules of lessons
    • Timed AWS D1.1 lookups and 21 spec drills

    Lifetime access, including your retake

    The CWI exam fee is paid to AWS, not us: $1,255 for AWS members, $1,520 otherwise. An AWS retest costs $385 for Part B, $445 for A or C. Our prep for all three parts: $249. AWS 2026 price list.

    How this compares: price, renewal and refunds

    How we prepare you for Part B21 spec drills · 20 weld profiles · 3 timed exams
    • 21 Book of Specifications drills
    • 20 drawn weld profiles to measure and call accept or reject, with a new set whenever you want one
    • 3 timed practice exams at real length: 46 questions, 120 minutes
    • 7 modules of lessons

    Tack, your AI study assistant, helps on Part B with a week-by-week plan from your exam date and weak areas, step-by-step walk-throughs and a weak-spot quiz.

    Try 3 Part B questions
    1. 1. Worked example

      A structural fillet weld replica has a face that dips inward between the toes. How should the inspector use a leaf-type fillet gauge to check its size?

      Answer: B. Use the concave end with both tips on the members and check that its center point touches the weld face

      On a concave fillet the throat, not the legs, limits the size, so the concave end is used: tips on both members, and the center point must touch the face for the blade size to be met. The leg end reads the legs, which can look full on a concave weld, and the longer leg would overstate size even on a convex weld. Toe to toe width is not fillet size. The V-WAC reinforcement step measures height above a surface, which does not apply to a fillet's throat.

      Reference: AWS CWI Part B BOS 2017 clause 2.4 (structural fillet weld size); fillet gauge practice
    2. 2. Welding Inspection and Discontinuities

      On a pipeline replica, undercut reads 0.018 in, 0.027 in and 0.022 in at three places. Using an invented example limit of 0.025 in (not the book's value), which record is correct?

    3. 3. Procedure and Performance Qualifications

      Use this invented rule, not the book's value: qualification lapses after 6 months without using the process. A welder qualified in GTAW on 1 Feb, used GTAW on 15 Apr, used SMAW on 1 Sep and used GTAW again on 20 Nov. What is the GTAW status on 20 Nov?

    Other options

    Is your employer paying?
    Have my manager pay instead

    Your manager pays with a company card. You get the plan.

    Buying for a crew? Request a quote

    Buying for a team, or need an invoice or purchase order? Email us at hello@filletgauge.com.

    Everything in Full CWI prep

    Parts A, B and C (D1.1) together, for the full CWI exam.

    One payment. Lifetime access.
    • 1,455 different practice questions across the three courses, each one explained
    • Part A course: 10 modules, 720 practice questions, 2 timed exams
    • Part B course: 7 modules, 354 practice questions, 3 timed exams
    • Part C (D1.1) course: 9 modules, 381 practice questions, 2 timed exams
    • After each timed exam, see how each domain moved since your last one
    • A study plan for each course, from your free check and exam date
    • Today's 10: ten a day, and every miss comes back until you get it right
    • Listen to flashcards and Today's 10 on the go
    • Readiness by domain, from your own practice results
    • Flashcards for each course, with spaced review
    • Part C (D1.1) code-book tab map
    • Tack, your AI study assistant

    Best if: You are taking all three CWI parts. Part B comes first at an AWS test site, then A and C at Prometric.

    The courses in this bundle

    • Part A (10 modules)
    • Part B (7 modules)
    • Part C (D1.1) (9 modules)

    See every lesson topic

    In Full CWI prep

    • 1455original questions
    • 7timed exams at real length
    • 26modules of lessons
    • 20weld profiles to call

    What members get

    With the course and every bundle.

    • Today's 10 on the course home: ten questions picked from your missed questions and your weakest domainToday's 10 10 questions a day from your misses and your weakest domain, so what you got wrong comes back. Plus a missed set of up to 50.
    • The week card's Add my study plan to my calendar button and the full week-by-week planA plan to your exam date Set your date and get a week-by-week plan you can add to your calendar in one tap.
    • The readiness bar against its study target markerReadiness by domain Your practice results against a 75% study target, and how they moved this week. A study target, not a pass prediction.
    • Timed exams on the real clock. A live pace line, and Save and exit when you need a break. You pick up with the time you had left.
    • Where your time went. After an open-book timed exam, your slowest questions become a practice set.
    • An exam-day guide. What to bring, the references you may use and the calculator rules.

    What the course covers

    7 modules, mapped to the task numbers in American Welding Society's published Part B content outline. Taught to AWS CWI Part B Book of Specifications (2017).

    1. Measuring welds with the inspection tool kitOutline topic B.1.1

      Fillet weld gauges and weld size · The V-WAC gauge, hi-lo gauge and dial caliper · Zeroing tools and reading them consistently

    2. Judging replicas against acceptance criteriaOutline topics B.1.2, B.1.3

      Finding the right application clause: structural, pipeline or pressure piping · Weld profile and discontinuity criteria in a specification · Recording a reject with the clause that decides it

    3. Reviewing a WPS against its PQROutline topic B.2.1

      What a procedure record must show · Essential variables and qualified ranges · Spotting a WPS that exceeds its PQR

    4. Checking welder qualification recordsOutline topic B.2.2

      What a welder qualification record must show · Positions, thickness and diameter qualified · When a welder's qualification lapses

    5. Bend specimens and test resultsOutline topic B.3.1

      How bend specimens are cut and ground · Judging bend and tension results against criteria

    6. NDE in the exhibits bookletOutline topic B.4.1

      Recognizing an NDE method from a photograph · Reading an NDE report

    7. Finding your way in the Book of SpecificationsOutline topic B.5.1

      How the Book of Specifications is organized · Annex tables: groupings, numbers and pipe schedules · Drawings, symbols and narratives in a question

    Practice drawn to the CWI Part B outline: every domain within 2 points of its exam weight

    • Welding Inspection and Discontinuities40%
    • Procedure and Performance Qualifications33%
    • Destructive Testing and Properties9%
    • NDE Application9%
    • Utilization of Specifications and Drawings9%
    See the numbers

    Each domain's weight on the CWI Part B outline, as our timed exams draw it, beside its share of the 354-question bank.

    DomainOutlineBank
    Welding Inspection and Discontinuities40%38%
    Procedure and Performance Qualifications33%32%
    Destructive Testing and Properties9%10%
    NDE Application9%10%
    Utilization of Specifications and Drawings9%10%
    • 1455 original questions, every one explained. Review every miss after each timed exam. Practice sets show you the ones you haven't seen first.
    • Every question you miss comes back 1, 3 and 7 days later, until you get it right each time. Flashcards are scheduled with FSRS spaced repetition.
    • Timed code-lookup drills that show how fast you find the right section.
    • Ask Tack about any practice question. It cites only section numbers it can check against the question and your course, and holds back a reply that names any other.
    • Add your exam date and your week-by-week study plan to your calendar (.ics file).
    • Start with the free 10-question check: no signup, and your score shows without an email.
    • One payment. No subscription, nothing renews.
    • Didn't pass? Every plan except the 7-day pass has lifetime access. Your retake prep is already paid for.

    Look inside the course

    The screens you get after checkout, with sample answers.

    • Book of Specifications lookups
      Course practice screen for CWI Part B. A question asks which part of the Book of Specifications to open to group two electrodes. The correct annex is marked and the explanation names what each wrong annex covers, with the reference below.
      Book of Specifications lookupsDrill the lookup the exam keeps asking for: which annex, table or clause answers the question. The answer and the reason come straight after.
    • Timed Part B form
      Timed practice exam screen for CWI Part B with a countdown clock, a flag-for-review button and a numbered question navigator that marks answered and flagged questions.
      Timed Part B form46 questions on the 120-minute clock, a flag on every question and a navigator that shows what you answered and flagged.
    • Readiness by domain
      Readiness by domain panel for CWI Part B with an accuracy bar per domain. Each domain is marked on track or needs work with its accuracy and answers given, and a link to drill the weakest one. It ends with the line that these are practice results only.
      Readiness by domainEach Part B domain rated from your own practice answers, with a one-click drill into the one that needs work. Practice results only, never a prediction of the real exam.
    • Today's 10
      Today's 10 card on the course home for CWI Part B. It reads 10 questions picked for you, 3 missed questions and 7 from your weakest domain, and says a question leaves the set when you answer it right on a later day.

    The free check uses the same question style and explanations as the course.

    Questions

    Is this enough to pass?

    Nobody can promise you a pass, and we don't. The plan gives you 26 modules of lessons, 1455 questions and 7 timed practice exams. Each question comes with a worked explanation and its reference. You also get 78 end-of-module checks, timed code-lookup drills in sets of 8, 21 specification drills, 20 weld profiles and 7 worked calculations. Today's 10 and your missed set bring your misses back on later days, so you work the bank instead of reading it once. Your readiness by domain shows which areas still need work before exam day.

    Is it up to date for my exam?

    The questions follow American Welding Society's published content outline. We last checked the outline against its published source on 19 October 2026. Part B questions are written to AWS CWI Part B Book of Specifications (2017). The Book of Specifications is a free PDF from AWS. Part C (D1.1) questions are written to AWS D1.1/D1.1M:2025. The timed lookup drills follow the D1.1 2020 clause layout, and the lookup page says so. Updates are included while you have access.

    How is this different from the free check?

    The free check is 10 questions with the answer and explanation after each, so you can see where you stand. The Full CWI prep gives you 26 modules of lessons, 1455 questions and 7 timed practice exams, with practice sets that show you unseen questions first, your misses brought back on later days and readiness by domain from your practice answers.

    How long do I keep access?

    Lifetime access: your access has no end date. Your exam date does not end it, so you keep it after you sit the exam, pass or not. Updates are included, so if American Welding Society moves this exam to a newer code edition while you have access, your course moves with it. The 7-day pass is the exception. 7-day pass: access ends 7 days after payment, to the minute. It does not renew and is not a subscription. A timed practice exam started before then can still be finished.

    Can my employer pay?

    Yes. Pay at checkout and we email a receipt you can expense, or download a reimbursement request to send your manager.

    What if I need a retest?

    Your access has no end date, so your course, your scores and your missed set are still there. AWS allows up to 3 retests in 3 years from your first test date. The second and third need proof of more training first. A Part C retest uses the same code as your first Part C.

    More questions (15)
    Is Tack AI, and is it accurate?

    Tack is an AI study assistant, not a person or an instructor. It answers from the course's own explanations, references and lessons, and a reply that names a section number those do not hold is not shown. It can still be wrong, so check important details against your lessons and references. It does not see the exam, so it cannot tell you what is on your exam.

    Can I get a refund?

    Eligibility depends on your plan, when you request a refund and your paid use. See the refund terms for the conditions and exceptions.

    When do I get access?

    Straight away. Checkout takes you to your course, and the receipt email has the same link.

    Can I study on my phone or offline?

    Yes on a phone, tablet or computer. It runs in your browser, so there is no app to download. You can save a lesson module for offline reading for up to 30 days at a time, or print it. Practice and timed exams need a connection; if it drops during a timed exam, your answers stay on the device and save when you reconnect.

    If I buy the 7-day pass now, is its price taken off a bigger plan later?

    No. Each plan is a separate purchase at its listed price, and the $29 paid for the 7-day pass is not credited toward another plan. With more than a week before your exam, a full plan is the better buy.

    What is the difference between the practice pack and the course?

    The practice pack is the question bank and the timed practice exams. The course adds a lesson for every task in American Welding Society's content outline, worked calculations, specification drills, a study plan built from your free 10-question check and an exam-day checklist. If any domain scored under about 60%, take the course.

    Are the questions copied from the exam?

    No. Every question is original and written to American Welding Society's published content outline. Exam content is confidential and we never use it. We are not affiliated with or endorsed by AWS, ICC or AISC.

    How are the questions written?

    In our own words, to AWS's current published outline. See how many questions cover each domain.

    Do I need my own copy of AWS D1.1?

    For Part C, no. AWS provides D1.1:2025 on screen as a PDF, so you do not need a printed copy. The course cites sections by number so you practice finding them, and we never reproduce the code's text. Parts A and B need no copy: Part A is closed book and Part B gives you its Book of Specifications.

    What is the Part B task?

    You judge weld replicas with a gauge kit against a specification, the AWS Book of Specifications. That is the task our Part B course trains.

    In what order do I take the three parts?

    Part B comes first. You book it with your application, at an AWS test site, in one of three fixed daily groups that check in at about 7:00 a.m., 10:45 a.m. or 2:45 p.m. Late arrivals are not moved to another group. About 4 to 6 weeks after you apply, AWS emails a confirmation letter with the eligibility codes you use to book Parts A and C at Prometric.

    What score do I need to pass?

    AWS requires 72% on each part and 72% overall, the average of the three parts. Scores are rounded down to the nearest whole percent.

    Why is this so much less than a seminar?

    We teach online, so there is no classroom, travel or time off work. You get lessons, drills and timed exams on your phone or computer, and they stay yours.

    What does the CWI exam fee cover?

    AWS prices members and non-members separately. The non-member price includes a 3-year AWS membership. The all-parts fee also includes the Prometric seat fees, $60 each for Parts A and C.

    How do I get back into my course?

    Use the link in your receipt email. If you can't find it, enter your email on the course page and we resend it to the address on your order.

    AWS exam registration fees

    AWS exam fees are paid to AWS, not us. Our prices cover Fillet Gauge prep, not the exam.

    The AWS non-member exam-registration price includes 3 years of AWS membership; the AWS all-parts exam-registration fee includes Prometric seat fees.

    AWS price list
    More options

    Not ready? Try the free 10-question check

    See the teaching before you buyRead a complete lesson from the course, “Measuring welds with the inspection tool kit”, and try a short practice set with full explanations. Free, no signup.

    Read the free lesson

    See how Tack answers

    A concave fillet weld's throat

    Both legs of a fillet weld measure right on the gauge, but its face is dished in. What should you check next?

    1. The throat, which can be thinner than the legs suggestYour answer, right
    2. Nothing more, since the legs are what count
    3. The color of the weld face
    4. How far the weld runs along the joint

    You: Why the throat? Both legs were the right size.

    Tack: A dished-in face pulls the surface of the weld back toward the corner. So the shortest distance from the root to the face gets smaller, even while both legs still measure right. That shortest distance is what carries the load, so a concave weld can come up short with legs that look fine.

    Key point: On a concave fillet, check the throat: it can fall short even when both legs measure right.

    An original example, not an exam question. AI can be wrong, so check it against your course.

    Readiness by domain panel for CWI Part B with an accuracy bar per domain. Each domain is marked on track or needs work with its accuracy and answers given, and a link to drill the weakest one. It ends with the line that these are practice results only.

    See your dashboard first

    Starter dashboard. Day 1 and the parts marked open are free.

    Free. Your dashboard opens as soon as you save.

    Back to plans and prices

    Instant access. Everything in the plan you choose opens as soon as checkout completes.

    Discontinuity calls: measure, then accept or reject

    Drawn weld profiles with undercut, overlap, convexity, underfill and misalignment. Read the scale, then make the call.

    Try 10 free cases