ICC special inspector certifications compared

ICC certifies special inspectors in eight categories, from structural steel and bolting to soils and spray-applied fireproofing. Most are earned by passing a codes module and a plans module, plus a General Requirements module you take only once. Two categories ask for another certification first. Pick the category that matches the work you inspect, and if steel is your work, start with S1.

ICC's certification alone does not make you a special inspector under IBC Chapter 17. The building official in each jurisdiction decides who may inspect, and uses ICC's certification as one way to weigh your qualifications.

ICC's special inspector certifications side by side

CertificationICC codeExams to passQuestions and timeNeeds first
Structural Steel and BoltingS1GR, S1C codes, S1P plansS1C: 60 in 2 hours. S1P: 30 in 1.5 hoursNothing ICC lists
Structural WeldingS2S2C codes, S2P plansS2C: 60 in 2 hours. S2P: not shownThe S1 certification
Reinforced Concrete47GR, 47C codes, 47P plans47C: 60 in 2 hours. 47P: 30 in 1.5 hoursNothing ICC lists
Prestressed Concrete9292C codes, 92P plans92C: 60 in 2 hours. 92P: 30 in 1.5 hoursThe Reinforced Concrete Special Inspector certification (49)
Structural Masonry84GR, 84C codes, 84P plans84C: 60 in 2 hours. 84P: 30 in 1.5 hoursNothing ICC lists
SoilsECGR, ECC codes, ECP plansECC: 60 in 2 hours. ECP: not shownNothing ICC lists
Spray-applied Fireproofing86GR, one codes and plans exam (86)Not shownNothing ICC lists
Tall Mass Timber Buildings93GR, one exam (93)93: 70 in 2.5 hoursNothing ICC lists

Question counts and times come from each module's ICC Store page. The store pages we read did not show GR, S2P, ECP or 86, so check ICC's Exam Catalog for those before you book.

Category 47 is also the first step to two further concrete levels. Category 48 (Reinforced Concrete Special Inspector Associate) adds ACI's Concrete Field Testing Technician Grade I. Category 49 (Reinforced Concrete Special Inspector) needs that Grade I card plus ACI's experience evaluation. ICC's page sends you to ACI for both.

One General Requirements module for every path

GR is a one-time module shared by every ICC special inspector certification. Pass it once and it applies to the next category you add. If you already hold a current ICC special inspector certification, you skip GR and take only the codes and plans modules for the new category.

ICC's special inspector FAQ adds three rules that apply to every path:

  • Any order. You can take GR, the codes module and the plans module in whichever order suits you.
  • Three years. You have three years to pass every module and prerequisite for a certification.
  • Six attempts. You can take an exam up to six times in a six-month period.

Once every module is passed and active, ICC grants the certification automatically.

Try one question

Question 1 of the free 10-question check on ICC S1. No signup. Then ask Tack, the AI study assistant, why the answer is right and the others are wrong.

Question 1 of 10 · free checkUntimed

High-Strength Bolting

On a fictional project, which joint type requires the inspector to check the faying surfaces against a surface class shown on the drawings?

Press A-D or 1-4 to choose an answer while this question is on screen.

Choose an answer to begin

Where you take the exams: PRONTO

Every special inspector module store page we read lists PRONTO, ICC's online proctored testing, as the exam format. You choose between testing from home or an office with a live remote proctor, or at one of more than 550 Meazure Learning test centers. Either way, the exam runs in a single session.

The plans modules show plan sets as on-screen exhibits, and a tutorial before the exam shows you how to scroll, open exhibits and zoom. ICC also offers a free PRONTO Special Inspector Plans Exercise that walks through the plan viewer with a guided practice exam.

Where a CWI fits

AWS's Certified Welding Inspector and ICC's special inspector certifications come from different bodies, and ICC's pages we read list no CWI route into S1 or S2. On structural steel jobs, though, the work sits side by side. A CWI inspects welds to a welding code, while S1 covers high-strength bolting, steel framing observation, material sampling and testing, and general requirements. If ICC's Structural Welding certification is your goal, S1 comes first, because ICC lists it as the prerequisite for S2.

Read the S1 exam guide for its modules and outline, or the AWS CWI exam guide for the welding side.

Take the free 10-question check

Starting with steel and bolting? Take the free 10-question ICC S1 check. It is written to ICC's S1 content outline, needs no signup and explains every answer, so you see which areas to work on before you buy S1C.

FAQ

What is an ICC special inspector certification?

It is ICC's credential for inspecting one kind of construction, such as structural steel and bolting, reinforced concrete or soils. ICC says it does not by itself qualify you as a special inspector under IBC Chapter 17. The building official in your jurisdiction makes that call and can use the certification as evidence of your qualifications.

Do I have to take the General Requirements module for every certification?

No. GR is a one-time module. If you already hold a current ICC special inspector certification, you take only the codes and plans modules for the next one.

Can I take ICC special inspector exams online?

Yes. The module store pages list PRONTO, ICC's online proctored testing, as the format. You can test remotely with a live proctor or at a Meazure Learning test center, in one session.

Where do our practice questions come from?

Every question is original and written to ICC's published outline.

Not affiliated with or endorsed by ICC, ACI or AWS.

Ask Tack: Am I ready?

Ask Tack before you buy AI your AI study assistant

See what's on the ICC S1 exam, test yourself with 5 quick questions, or find the plan that fits you.

The ICC S1 course

Available now · instant access

Learn each S1 outline area, then prove it on timed practice exams.

S1 course$99Get the S1 course · $99

Instant access. Terms and refunds · Secure checkout by Stripe · Billed by Nori Software

What's inside
  • 8modules of lessonsEvery task on the outline
  • 3full-length timed exams60 questions in 120 minutes each
  • 258practice questionsEach one explained
  • 1week-by-week study planSet to your exam date

Turn a practice answer into a study step. In untimed practice, ask Tack AI about any question you answer, follow up, then see your weakest topics and what to drill next.

Every answer comes with a full explanation.

Sources

Show the list
  • Special Inspector Certifications, International Code Council: the categories, codes, modules, prerequisites, the GR waiver and the IBC Chapter 17 note. Checked 19 Nov 2026.
  • Exam Catalog, International Code Council, and its national exams list (Last Update 01/12/2026): every special inspector module code. Checked 19 Nov 2026.
  • Special Inspector Exam FAQs, International Code Council, updated 20 Nov 2025: GR once, any order, three years, six attempts, automatic grant, exhibits and the free plans exercise. Checked 19 Nov 2026.
  • PRONTO, International Code Council: remote or test center, single session. Checked 19 Nov 2026.
  • ICC Store module pages for S1C, S1P, S2C, 47C, 47P, 92C, 92P, 84C, 84P, ECC and 93, International Code Council: questions, duration and the PRONTO format. Checked 19 Nov 2026.

Fillet Gauge editorial team

Facts come from the sources listed above. If something has changed, tell us and we will correct it.

Your next step

Ready to see where you stand on ICC S1?

Free, untimed and scored by domain. No signup.

Free 10-question check

S1 course. Lessons, timed practice exams and a plan around your exam date.

Get S1 course · $99

Want a timed run? Take the free 25-question practice test (about 50 minutes). No email needed.

Prefer paper? Free printables

All 16 related guides